Lithium Polymer 3 Cell, 11.1V, 10000mAh, 10C discharge Battery

Important: This product can not be shipped outside INDIA.

Introduction

This is high performance 3 Cell, 11.1V, 10000mAh, 10C Battery. It can give discharge current of 100Amps. It has ‘T’ type Power connector and 4 pin JST connector for battery charging. It is the most ideal battery for the robots which requires high current. It comes with extra Male ‘T’ type power connector.

Note:

• Any smart battery charger will refuse to charge the battery if voltage of any individual cell in the battery pack drops below 3.3V. Never ever allow this battery packs voltage to fall below 9.9V. In order to protect the battery from deep discharge we recommend to using Battery Protection circuits from NEX Robotics.
• We strongly recommend to putting battery inside Fire Proof Bag from NEX Robotics while charging the battery.
• Over charging may also damage the battery.
• This product will be shipped within 7 days from the date of purchase

Specifications

Battery type: Lithium Polymer
Battery Voltage: 11.1V
Battery capacity: 10000mAh
Number of cells: 3
Maximum constant discharge current: 100Amps (10C)
Maximum charging current: 20Amps (2C)
Recommended battery cut off voltage: 9.9V.
Battery weight: 700gms
Dimensions: Length: 16.5cm, Width: 8.0cm, Height: 4.5cm
Power Connector: ‘T’ type female power connector with 4mm² multistrand copper wire
Charge connector: 4pin JST connector (compatible with all Lithium Polymer battery chargers from NEX Robotics)

‘T’ type female and male power connectors

Battery Protection Circuits for Lithium Polymer Battery

Fire Proof Bag for Lithium Polymer Battery charging

Package Contains:
One Lithium Polymer 3 Cell, 11.1V, 10000mAh, 10C discharge Battery
One Male ‘T’ type power connector

Visit forum for Online Discussion on this product

Customer Reviews: