Fire Bird V ATMEGA2560 Robot Research Platform with Raspberr

Your Shopping Cart

Show Cart

Your Cart is currently empty.

You are here: Home

Products

Fire Bird V Robots

Fire Bird V ATMEGA2560 Robot Research Platform with Raspberry-Pi

QX-051 Quad Copter Ultrasonic Range Finder SCXL MaxSonar WRMT MB7589-1" BSPP

View Full-Size Image	Fire Bird V ATMEGA2560 Robot Research Platform with Raspberry-Pi
	Product ID: NR-FB5-ATMEGA2560-RPi Weight: 1562 gms Price: Rs.60,000.00 Ask a question about this product
	Quantity:
	In Stock: 100 Usually ships in:
	Fire Bird V ATMEGA2560 Robot Research Platform with Raspberry-Pi is a standard AVR microcontroller based Fire Bird V which is fitted with Raspberry-Pi SBC (Single Board Computer) and higher resolution encoders. Fire Bird V will help you get acquainted with the world of robotics and embedded systems. Thanks to its innovative architecture and adoption of the ‘Open Source Philosophy’ in its software and hardware design, you will be able to create and contribute too, complex applications that run on this platform, helping you acquire expertise as you spend more time with them. Fire Bird V is designed by NEX Robotics and Embedded Real Time Systems lab, CSE IIT Bombay. With readily available Generic libraries APIs for interfacing the FireBird V Platform with Raspberry Pi, user can develop the real time applications, based on Image Processing, Intelligent Navigation, IoTs, artificial intelligence and many more. Applications Learning Embedded systems and robotics Mapping and autonomous navigation Mobile sensor network Real-Time systems Collaborative robotics Swarm robotics and other behaviors Control systems Fire Bird V deployed more than 350 organisations in india Features Raspberry Pi (Model: Raspberry Pi3 B+) 64bit CPU ,1.4Ghz RAM (1 GB ) 2.4 GHz and 5 GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabyte Ethernet over 2.0 (maximum throughput 300Mbps) 4 USB 2 ports 40-pin extended GPIO 4 Pole stereo output and composite video port Full size HDMI CSI camera port for connecting a Raspberry Pi camera DSI display port for connecting a Raspberry Pi touchscreen display H.264,MPEG-4 decode (1080p30): h.264 encode (1080p30);Open GL ES1.1, 2.0 graphics Micro SD port for loading your operating system and storing data Switched Micro USB power source , 5VDC via GPIO header, Power on Ethernet(PoE)-enabled (Requires Separate PoE HAT) Fire Bird V ATMEGA2560 Robotic Research Platform Microcontroller Atmel ATMEGA2560 as Master microcontroller Atmel ATMEGA8 as Slave microcontroller Sensors Three white line sensors (extendable to 7) Five Sharp GP2D12 IR range sensor (80cm) (One in default configuration) (Also supports GP2D120 (30cm) and GP2Y0A02 (150cm) Eight analog IR proximity sensors (20cm) Eight analog directional light intensity sensors Two position encoders (extendable to four) Battery voltage sensing Current Sensing (Optional) Servo mounted sensor pod (optional) Wireless colour camera (optional) Ultrasound scanner (optional) Gyroscope and Accelerometer (optional) Magnetometer (optional) GPS receiver (optional) Indicators 2 x 16 Characters LCD Indicator LEDs Buzzer Control Autonomous Control PC as “Master” and Robot as “Slave” in wired or wireless mode Distributed (multi robot) Communication Wireless ZigBee Communication (2.4GHZ) (Optional) USB Communication Wired RS232 (serial) communication Simplex infrared communication (From infrared remote to robot) Robotic Arm 4 DOF robotic arm (optional) Dimensions Diameter: 17.2cm Height: 16cm Weight: 2475gms Power 9.6V, 2100mAh Nickel Metal Hydride (NiMH) battery pack and external Auxiliary power using battery charger. Battery endurance 2 Hours, while motors are operational at 75% of time. Payload 2 kg on flat surface Locomotion Two DC geared motors in differential drive configuration and caster wheel at front as support Top Speed: 40.8 cm / second Wheel Diameter: 52mm Position encoder resolution: 0.30mm / pulse Kit Contents Raspberry Pi model 3 model B (Qty 1) Battery power bank to provide supply for Raspberry Pi (Qty 1) Micro SD card preloaded with Raspbian OS and all initial configuration setup (Qty 1) Raspberry Pi power cable (Qty 1) Battery bank charging cable (Qty 1) Documentation CD(Fire Bird V ATMEGA2560 Robot with Raspberry-Pi )(Qty 1) Documentation CD(Fire Bird V ATMEGA2560 Robotic Research Platform)(Qty 1) USB Programmer (ISP) for FBV Robot(Qty 1) Adapter for Robot Battery Charging and Auxiliary Powering of FBV Robot( Qty 1) Serial Cable for FBV Robot ( Qty 1) USB Cable for FBV Robot ( Qty 1) Flex printed 6 feet white line for FBV Robot ( Qty 1)
ROHS Compliant : NO

Customer Reviews: There are yet no reviews for this product. Please log in to write a review.

Contact Us

Tel: +91-9833553020

09.30 AM to 06.00 PM IST, Monday - Saturday

Address :
Nex Robotics Pvt Ltd.
Unit No. 13,
Building No. 2 (A3), Sector 1,
Millennium Business Park,
Mahape, Navi Mumbai 400 710,
Maharashtra, INDIA

NEX Robotics location on map

Login

RESEARCH

Find out more about latest research work being done at NEX Robotics. Here you will find links/papers demonstrating research done on our latest development platforms.

NEWS

Nex robotics has added support for Microsoft Robotics Developer Studio (MRDS) on FireBird V research platform. FireBird V is one of the most widely deployed research platforms designed by Department of CSE, IIT Bombay and Nex robotics.

Read more...

NEX Robotics has designed Intelligent autonomous transport vehicle for transporting personals autonomously inside the campus and for advance research in mobile robotics.

Read more..