60 RPM Single Shaft Plastic Gear Motor

Introduction

This is a 60 RPM low cost single shaft DC geared motor. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. For robot with Tank Tracks use Tank Track Links with 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Drive shaft has clutch for non continuous protection from overload which protects gears from the sudden overload. Motor runs smoothly from 2V to 12V and gives wide range of RPM, and torque. Table below gives fairly good idea of the motor’s performance in terms of RPM, no load current as a function of voltage and stall torque, stall current as a function of voltage.

For compatible wheels refer to Wheels and Accessories product category.

To mount the motor on the chassis use Motor Mounting Kit for Plastic Gear Motor from NEX Robotics.

Specifications

• RPM: 60 at 12V
• Voltage: 2V to 12V
• Current: No load current and stall current are function of voltage. Fore more data refer below tables
• Clutch for non continuous protection from overload conditions
• Motor weight: 30gms
• Matched wheels:
  • 69mm Diameter Wheel for Plastic Gear Motors
  • 87mm Diameter Multipurpose Wheel for Plastic Gear Motors
• Matched wheels for tank robot: Tank Track Links with 87mm Diameter Multipurpose Wheel for Plastic Gear Motors

Internals of the Single Shaft Plastic Gear Motor

Motor Mounting Kit for Plastic Gear Motor from NEX Robotics.

Note:

• When torque of the motor is increased beyond set threshold, clutch kicks in to action to protect the gears.
• Motors’s data can vary by ±10%

Dimensions

Visit forum for Online Discussion on this product

Customer Reviews:

Awesome torque.. A must buy along the recommended wheels. But, if the mounting (like the ones available for 6mm shaft motors) for these motors were
not sold by nex-robotics yet.

Good OnernThis is a 60 RPM low cost single shaft DC geared motor. It is most suitable for light weight robot requiring small power. This motor can be
used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. For robot with Tank Tracks use
Tank Track Links with 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.rnrnDrive shaft has clutch for non continuous protection from overload
which protects gears from the sudden overload. Motor runs smoothly from 2V to 12V and gives wide range of RPM, and torque. Table below gives fairly
good idea of the motor’s performance in terms of RPM, no load current as a function of voltage and stall torque, stall current as a function of
voltage.rn

You may also be interested in this/these product(s)

87mm Diameter Multipurpose Wheel for Plastic Gear Motors Rs.23.60

69mm Diameter Wheel for Plastic Gear Motors Rs.23.60