15V, 5Amp SMPS

Introduction

This is high quality 15V, 5Amp SMPS intended for industrial use. We use these SMPS for heavy duty robotics applications. They have built in Short circuit, Overload and Over voltage protection. It can withstand input of 1500V AC up to 60 seconds. Output voltage can be adjusted by up to +-10% of the output voltage.

Specifications

• Output: 15V, 5Amp
• Input:180V to 260V AC , 47 to 63Hz
• LED power indication
• DC calibration range: +-10% of the output voltage
• Overload protection: up to 150% with auto recovery
• Over voltage protection: up to 135% of the output voltage
• Short Circuit protection: long term
• Setup time: Less than 1 second
• Hold-up time: greater than 20mS
• Over voltage tolerance for input to output: 1500V AC for 60 seconds
• Over voltage tolerance for input to ground: 1500V AC for 60 seconds
• Over voltage tolerance for output to ground: 500V DC for 60 seconds
• Operating temperature: 0 to 450C
• Operating Humidity: 20% to 80% Non condensing (very important)
• Power conversion efficiency: 80%
• Safety standards: EN60950, GB4943
• Dimension: 159 x 98 x 38mm
• Product weight: 437gms

Package contains

15V, 5Amp SMPS

Use Connector Lug to connect Power cables with the SMPS power connector
Use Mains Wire with Connector Lug for powering up the SMPS
Use DC Connector Cable to connect SMPS with development boards
Use Heat Shrink Tube 5mm to cover Lugs

Visit Forum for Online discussion on this product

Customer Reviews:

You may also be interested in this/these product(s)

Connector Lug Rs.3.78

DC Connector Cable Rs.63.44

Mains Wire with Connector Lug Rs.113.28