20x4 Blue Serial LCD

Introduction:

The serial 20x4 LCD module from Nex-Robotics can be controlled by I2C or standard serial port with TTL 5V level signals. This dramatically reduces the number of pins consumed by LCD while interfacing with a microcontroller. It uses only two lines (TX and RX) for communication with any device. A well defined and easy to use protocol ensures smooth and error free operation.

• Do NOT connect RS232 level interface directly to the module. It will destroy the module and will make it non-operational.
• For 20x4 LCD user will not be able to use the contrast pot. This facility is only available for 16x2 LCD's.

Specifications:

• Serial Interface: Baud Rate 9600,8-N-1,No Flow control
• TTL 5V interface
• I2C interface
• 560 bytes FIFO buffer
• Low power consumption
• Up to 8 custom characters
• 5 x 8 dot matrix
• 80 X 8-bit display RAM (80 characters max.) for 20X4 LCD

Feature:

• Operational Backspace
• Line feed
• Back light ON/OFF
• Display on/off
• Clear Screen
• Underline/blinking cursor
• Go to line/char

Kit Contains:

20x4 Serial LCD Module – Qty 1

Download:

Download Manual

Application Examples:

20x4 Serial LCD Interface with LPC2148 Development Board for UART Mode

20x4 Serial LCD Interface with LPC2148 Development Board for I2C Mode

20x4 Serial LCD Interface with ATMEGA2560 Development Board for UART Mode

20x4 Serial LCD Interface with ATMEGA2560 Development Board for I2C Mode

Visit forum for Online Discussion on this product

Customer Reviews:

You may also be interested in this/these product(s)

20x4 green LCD backlight Rs.542.80

20x4 blue LCD backlight Rs.542.80

20x4 Green Serial LCD Rs.1,144.60