Ultrasonic Range Finder XL-EZ1 MB1210

Introduction

EZ1 (MB1210) sensor has high power output along with real-time auto calibration for changing conditions (temperature, voltage and acoustic or electrical noise) that ensure you receive the most reliable (in air) ranging data for every reading taken. The MB1210 consumes very low power at 3.3V – 5.5V and operation provides very short to long-range detection and ranging, in a tiny and compact form factor. The MB1210 detect objects from 0-cm to 765cm (25.1 feet) and provide sonar range information from 20-cm out to 765-cm with 1-cm resolution. Objects from 0-cm to 20-cm typically range as 20-cm. The interface output formats included are real time analog voltage envelope, analog voltage output and serial digital output.
To select correct sensor for your application refer to Sensor Selection Guide

Note: Objects from 0-mm to 1-mm may not be detected

Specifications

• Range: 20cm to 765cm
• Resolution: 1cm
• 3.3V to 5.5V supply with very low average current draw
• Range data output format:
  -Analog: (VCC/1024)/cm (4.9mV/cm for 5V and 3.2mV/cm for 3.3V)
  -Pulse width modulation
  -Serial (9600 baud rate)
• Data refresh rate: Up to 100 milliseconds (10Hz)
• Free run mode operation: continually measure and output range information
• Triggered mode operation: provides the range reading as desired
• Sensor operating frequency: 42KHz
• Hardware gain: 2000
• Used for long range, medium detection zone for small targets

Dimentions

Documents

EZ1 sensor datasheet
EZ1 sensor Beam width explanation

Visit forum for Online Discussion on this product

Customer Reviews: