N2822, 1800Kv Brushless DC Outrunner Motor

Introduction:

This 2822, 1800kv BLDC motor gives maximum thrust of 900gms and weights only 38gms. It has excellent electrical efficiency because of its precision built and high quality parts. It is best suited for medium and small size Quadrotor (quadcopter), Hexacoptor, Octacoptor etc. The rotor shaft is made up of hardened steel and supported by sealed dual bearings. It comes with propeller mount with 5mm diameter. You can fit most of the propellers from NEX Robotics on this motor. This motor can be run by 2 to 3 cell lithium polymer batteries.

Kit contains:

One N2822, 1800Kv Brushless DC Outrunner Motor
One motor mount with four mounting screws
One Propeller adaptor

Note:

• Because of vibrations during operation allen grubs, nuts etc may come off. To prevent this apply Thread Locker on all the grubs, nuts, bolts etc.
• Use M3 Nylon Nut and M3 bolts in your construction.

Recommended propellers:

For 2-3 cell Lithium Polymer battery pack:

8x4.5 inch (20x 11cm) Pusher and Puller Propeller Matched Pair
10x4.5 inch (25x 11cm) Pusher and Puller Propeller Matched Pair

Recommended Motor Driver:

20Amp BLDC ESC
30A BLDC ESC
40Amp BLDC ESC

Recommended Battery packs for Quadrotor / Hexacoptor / Octacoptor

Lithium Polymer 3 Cell, 11.1V, 3300mAh, 20C discharge Battery
Lithium Polymer 3 Cell, 11.1V, 5000mAh, 20C discharge Battery

Specifications:

KV(rpm/v): 1800
Max Power: 180W
Max Thrust: 900 grams
Weight: 38 grams
Shaft Diameter: 28mm
Shaft Length: 37mm
Recommended Propeller for battery: 8x4.5 for 2S battery
Battery: 2S-3S Li-Po
ESC(A): 20A

Dimensions:

Motor Diameter: 28mm
Motor Length: 30mm
Shaft Diameter: 5mm
Shaft Length: 65.5mm

BLDC Motor size comparison

Related Products

Thread Locker
21.59x15 Puller Propeller
21.59x15 Pusher Propeller

17.7x10.16cm Puller Propeller
17.7x10.16cm Pusher Propeller

20Amp BLDC ESC
40Amp BLDC ESC

Visit forum for Online Discussion on this product

Customer Reviews: