Nex Robotics

Your Shopping Cart




Your Cart is currently empty.

   

You are here: Home Products Development Tools AVR Programmer and Accessories 60 RPM Single Shaft R/A Plastic Gear Motor
PrintE-mail
Automatic Wireless Column Scanner320 RPM Single Shaft Plastic Gear Motor

60 RPM Single Shaft R/A Plastic Gear Motor
View Full-Size Image


60 RPM Single Shaft R/A Plastic Gear Motor

Product ID: NR-GMD-PL-RA-ST-60
Weight: 31 gms
Price: Rs.50.00

Ask a question about this product

  


Introduction

This is a 60 RPM low cost single shaft DC geared motor. It is most suitable for light weight robot requiring small power. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. For robot with Tank Tracks use Tank Track Links with 87mm Diameter Multipurpose Wheel for Plastic Gear Motors.

Drive shaft has clutch for non continuous protection from overload which protects gears from the sudden overload. Motor runs smoothly from 2V to 12V and gives wide range of RPM, and torque. Table below gives fairly good idea of the motor’s performance in terms of RPM, no load current as a function of voltage and stall torque, stall current as a function of voltage.

For compatible wheels refer to Wheels and Accessories product category.

To mount the motor on the chassis use Motor Mounting Kit for Plastic Gear Motor from NEX Robotics.

 

Specifications

Internals of the Single Shaft RA Plastic Gear Motor

Internals of the Dual Shaft Plastic Gear Motor ST1

Motor Mounting Kit for Plastic Gear Motor from NEX Robotics.

Motor performance in terms of RPM, current at no load and stall torque, stall current as a function of input voltage

Voltage (V)
RPM (No Load)
Current at no load (A)
Stall torque (Kg/cm)
Stall Current (A)
2
10
0.038
1.99
0.274
3
17
0.043
3.06
0.401
4
24
0.046
4.13
0.476
5
29
0.051
5.23
0.672
6
34
0.054
Clutch
Clutch
7
40
0.056
Clutch
Clutch
8
45
0.062
Clutch
Clutch
9
51
0.067
Clutch
Clutch
10
54
0.070
Clutch
Clutch
11
57
0.073
Clutch
Clutch
12
60
0.083
Clutch
Clutch

Note:

  • When torque of the motor is increased beyond set threshold, clutch kicks in to action to protect the gears.
  • Motors’s data can vary by ±10%

Dimensions

Dual Shaft Plastic Gear Motor ST Dimension

Visit forum for Online Discussion on this product



ROHS Compliant : YES


Customer Reviews:

vishnusmoke  (Sunday, 19 February 2012)
Rating: 5
If you are a beginner in robotics, this BO motor should give you a perfect start. It can run on normal alkaline batteries so that you can focus on
mobile robotics and not get distracted around the other variables that come into play.rnA must for starters. If you buy from Nex-Robotics (like me),
make sure to buy the motor clamps and the wheel. The 69mm wheel should be a good start with the alkaline batteries. The three fit together nicely
without any problems. rnrnFor the chassis, I would suggest that you start with 3mm fiberglass plastic which can be cut into shape easily using any
hacksaw and you can drill holes using a hand-drill or a small electric drill.rnrnStart with just two motors at the back and a castor wheel in the
front (again, buy this from nex-robotics so that you get all things in one shipment).rnrnI built a small cellphone controlled robot using these and
you can see the demo at http://www.youtube.com/watch?v=XQ6gt5hP6S0rnrnI'm writing a blog on the detailed construction and will publish it soon on
http://vsblogs.wordpress.com and http://www.vishnusharma.com rnrnKeep a watch....finally, to start with, buy the following components from
nex-robotics to build something similar to what I have:rn1. BO motors (2 nos)rn2. 69mm wheels (2 nos)rn3. Motor clamp for BO motors (2 nos)rn4. Castor
wheel (pick medium size for above motors)rn5. Studs (20 mm, around 16 nos) - These are used to sandwich multiple layers of fiberglass plastic on the
robot platform to hold motors and electronics separatelyrnrnI used ATTiny2313 and L293D to control the motors (all details on my wordpress
blog)rnrnRemember, you have to buy 3mm nut and bolt for the studs. While nex-robotics provides the studs, they do not provide the bolts (I wish they
would one day).rnrnFor motor clamps and wheels, they provide all nut bolts, just for the studs they do not.rnrnHappy roboting!




You may also be interested in this/these product(s)

87mm Diameter Multipurpose Wheel for Plastic Gear Motors
87mm Diameter Multipurpose Wheel for Plastic Gear Motors
Rs.23.60

69mm Diameter Wheel for Plastic Gear Motors
69mm Diameter Wheel for Plastic Gear Motors
Rs.23.60



Customers who bought this product also bought this/these product(s)

87mm Diameter Multipurpose Wheel for Plastic Gear Motors
87mm Diameter Multipurpose Wheel for Plastic Gear Motors
Rs.23.60



Contact Us

Tel: +91-9833553020

09.30 AM to 06.00 PM IST, Monday - Saturday

Address :
Nex Robotics Pvt Ltd.
Unit No. 13,
Building No. 2 (A3), Sector 1,
Millennium Business Park,
Mahape, Navi Mumbai 400 710,
Maharashtra, INDIA

NEX Robotics location on map

RESEARCH

Find out more about latest research work being done at NEX Robotics. Here you will find links/papers demonstrating research done on our latest development platforms.

NEWS

Nex robotics has added support for Microsoft Robotics Developer Studio (MRDS) on FireBird V research platform. FireBird V is one of the most widely deployed research platforms designed by Department of CSE, IIT Bombay and Nex robotics.

Read more...


NEX Robotics has designed Intelligent autonomous transport vehicle for transporting personals autonomously inside the campus and for advance research in mobile robotics.

Read more..

Newsletter Subscribe

FOLLOW US

AdSense Module


We Accept

Currency Selector


Testimonals