Ultrasonic Range Finder HRLV-EZ2-MB1023

Introduction

The HRLV-MaxSonar-EZ sensor line is the most cost-effective solution for applications where precision range-finding, low-voltage operation, space saving, and low-cost are needed.This sensor line provides high accuracy and high resolution ultrasonic proximity detection and ranging in air, in a package less than one cubic inch.

The EZ2 is a good compromise between sensitivity and side object rejection. This sensor is an excellent choice for applications that require slightly less side object detection and sensitivity than the HRLV-EZ2-MB1013.

This sensor line features 1-mm resolution, target-size and operating-voltage compensation for improved accuracy, superior rejection of outside noise sources, internal speed-of-sound temperature compensation. This ultrasonic sensor detects objects from 1-mm to 5-meters, senses range to objects from 30-cm to 5-meters, with large objects closer than 30-cm typically reported as 30-cm. The interface output formats are pulse width, analog voltage, and serial digital in either RS232 or TTL.

Specifications/Features

• Resolution: 1-mm
• Data refresh rate: 10Hz
• Range: 1mm to 5000mm (196inches)
• Sensor operates at 42kHz
• Data output format:
  -Analog Voltage (VCC/5120)/mm
  -RS232 or TTL Serial (9600 Baud rate)
  -Pulse Width Modulation (1us/mm)
• Virtually no sensor dead zone, objects closer than 30 cm will typically range as 30 cm
• Operating voltage: 2.5V-5.5V
• Average current requirement: 3.1mA
• Operational Temperature from -15°C to +65°C (+5°F to +149°F)
• Internal temperature compensation is standard
• Firmware filtering for better noise tolerance and clutter rejection
• Narrower beam then the MB1013 HRLV-MaxSonar-EZ1

Dimensions

Documents

HRLV-EZ2 sensor datasheet
HRLV-EZ2 sensor Beam width explanation
Maxbotics FAQ

Visit forum for Online Discussion on this product

Customer Reviews: